|
Swiss CNC Turning Service Medical Micro Parts 316L Stainless Steel Cannula Electrode Pins 0.6mm To 6mm
| Nama merek: | WISHTEK |
| Nomor Model: | OEM-SWISS-MED06 |
| MOQ: | 100 buah |
| Harga: | USD 0.35 - 6.80 / Piece |
| Ketentuan Pembayaran: | T/T, L/C, D/P, Western Union |
| Kemampuan Pasokan: | 300000 Potongan per Bulan |
Informasi Rinci
Tempat asal:
Shenzhen, Guangdong, Tiongkok
Sertifikasi:
ISO 9001:2015
Tipe Belok:
Pembubutan CNC headstock geser tipe Swiss
Kisaran Diameter:
0,6mm - 6mm
Lubang Minimal:
0,3 mm, rasio kedalaman dan diameter 8:1
Ketebalan Dinding Minimum:
0,1 mm
Toleransi Diameter:
+/-0,005mm, +/-0,003mm berdasarkan permintaan
Kekasaran Permukaan:
Ra 0,2 pada permukaan penyegelan dan geser
Kualitas Tepi:
Deburred, duri di bawah 20 mikron, diverifikasi mikroskop
Kemampuan Materi:
316L, 304, 17-4PH, titanium Gr2/Gr5, MP35N, nitinol, MENGINTIP
Permukaan Selesai:
Pasifasi ASTM A967, electropolishing, pelapisan emas atau nikel, PVD
Pembersihan:
Degreasing ultrasonik dan bilas air DI
Dokumentasi:
Laporan FAI, sertifikat material, catatan pasivasi, laporan ketebalan pelapisan
MOQ:
100 buah
Kemasan rincian:
Tas anti-statis atau baki ruangan bersih, pengering, label lot, karton ekspor berdinding ganda
Menyediakan kemampuan:
300000 Potongan per Bulan
Menyoroti:
medical micro swiss turning
,316L cannula turning service
,electrode pin tight tolerance
Deskripsi Produk
Swiss CNC Turning For Medical Micro Parts Cannula tubes, electrode pins, sensor probes and contact pins machined from 316L stainless steel and titanium, 0.6mm to 6mm diameter. Where The Difficulty Is A 0.8mm cannula with a 0.5mm through bore cannot be turned on a fixed headstock lathe without deflection and burr at the bore exit. The sliding headstock keeps the cut next to the guide bushing, so wall thickness stays uniform along the full length and the bore stays concentric
